Find a Service Center
Boston Gear
F7724-25-B5-G
700 Series 25:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101807808
- 1.50 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Frame Size | 56C |
| Media Mapping Output | G |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Motor Frame Size | B556C |
| Reduction Type | Single |
| Worm Position | Universal |
| Center Distance Code | 724 |
| Standard | AGMA Service Class I |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Style | Right Angle |
| Shaft Assembly Code | G |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Input Configuration | C-Face Quilled |
| Input Motor HP | 1.50 |
| Output Shaft Projection | Solid Left Output |
| Housing Material | Cast Iron |
| Output Shaft | Solid |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Output Configuration | Left Output |
| Box Width | 5 7/16 in |
| Output Speed | 70 rpm |
| Ratio | 25:1 |
| Base Mounting Attachment | No Base |
| Bore Code | B5 |
| Series | 700 |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Bolt Center | 5 in x 2 7/8 in |
| Torque Out @ 1150 rpm | 1150 in lb |
| Washdown Duty | No |
| Input Power Rating | 1.55 hp, 1.156 kW |
| Motor HP | 1 hp |
| Input (Shaft or Bore) Size | 5/8 in |
| Input HP @ RPM | 1.03 hp @ 1150 rpm, 1.55 hp @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Media Mapping Style | F |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Output Torque @ RPM | 1150 in lb @ 1150 rpm, 1199 in lb @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Output Torque | 1199 lb-in |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Fan Cooled | No |
| Motor Application | General Purpose |
| Frame | 56C |
| Use With | 724 |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Output Bore Shaft Dia. | 1.125 in |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Rated Efficiency | 86% |
| Center Distance | 2.375 in |
| Torque Out @ 1750 rpm | 1199 in lb |
| Box Length | 6 3/8 in |
| Family Name | F |
| Box Height | 6 15/16 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Lubrication | None |
| HP @ RPM | 1 hp @ 1800 rpm |
| Weight | 30.1 LB |
| EAN or UPC | 781711519998 |
