Find a Service Center
Boston Gear
F7724-30-B5-J
700 Series 30:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101833979
- 1 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base to Centerline of Input Shaft | 4 7/8 in |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Bolt Center | 5 in x 2 7/8 in |
| Rated Efficiency | 83% |
| HP @ RPM | 1 hp @ 1800 rpm |
| Torque Out @ 1750 rpm | 1200 in lb |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Lubrication | None |
| Frame | 56C |
| Standard | AGMA Service Class II |
| Media Mapping Style | F |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Input (Shaft or Bore) Size | 5/8 in |
| Frame Size | 56C |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Input HP @ RPM | 0.89 hp @ 1150 rpm, 1.33 hp @ 1750 rpm |
| Motor Frame Size | B556C |
| Input Motor HP | 1 |
| Media Mapping Output | J |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Box Height | 6 15/16 in |
| Output Shaft Projection | Solid Right Output |
| Worm Position | Universal |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Keyway Size | 3/16 x 3/32 |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Housing Material | Cast Iron |
| Center Distance Code | 724 |
| Output Shaft | Solid |
| Output Torque | 1200 lb-in |
| Material | Cast Iron, Standard Paint |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Use With | 724 |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Center Distance | 2.375 in |
| Box Length | 6 3/8 in |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Ratio | 30:1 |
| Motor Application | General Purpose |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Style | Right Angle |
| Motor HP | 1 hp |
| Series | 700 |
| Base Mounting Attachment | No Base |
| Reduction Type | Single |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Output Torque @ RPM | 1170 in lb @ 1150 rpm, 1200 in lb @ 1750 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Output Speed | 58.3 rpm |
| Output Configuration | Right Output |
| Washdown Duty | No |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Box Width | 5 7/16 in |
| Bore Code | B5 |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Fan Cooled | No |
| Shaft Assembly Code | J |
| Input Power Rating | 1.33 hp, 0.992 kW |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Torque Out @ 1150 rpm | 1170 in lb |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Input Configuration | C-Face Quilled |
| Output Bore Shaft Dia. | 1.125 in |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Family Name | F |
| Weight | 30.1 LB |
| EAN or UPC | 781711520048 |
| NSN Number | 6105-01-357-9748 |
