Find a Service Center
Boston Gear
F7724-40-B5-J
700 Series 40:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101810908
- 1 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Lubrication | None |
| Fan Cooled | No |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Washdown Duty | No |
| Output Bore Shaft Dia. | 1.125 in |
| Motor Application | General Purpose |
| Output Shaft Projection | Solid Right Output |
| Base Mounting Attachment | No Base |
| Housing Material | Cast Iron |
| Center Distance Code | 724 |
| Input HP @ RPM | 0.7 hp @ 1150 rpm, 1.08 hp @ 1750 rpm |
| Box Length | 6 3/8 in |
| Rated Efficiency | 77% |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Output Speed | 43.8 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Frame Size | 56C |
| Use With | 724 |
| Style | Right Angle |
| Center Distance | 2.375 in |
| Input Motor HP | 1 |
| Family Name | F |
| Worm Position | Universal |
| Box Width | 5 7/16 in |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Ratio | 40:1 |
| Frame | 56C |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Bolt Center | 5 in x 2 7/8 in |
| Output Configuration | Right Output |
| Media Mapping Output | J |
| Output Torque | 1206 lb-in |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Output Torque @ RPM | 1160 in lb @ 1150 rpm, 1206 in lb @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Media Mapping Style | F |
| Shaft Assembly Code | J |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input (Shaft or Bore) Size | 5/8 in |
| Series | 700 |
| Input Configuration | C-Face Quilled |
| Motor HP | 3/4 hp |
| Max. Input HP @ 100 rpm | 0.11 hp |
| Torque Out @ 1150 rpm | 1160 in lb |
| Input Power Rating | 1.08 hp, 0.805 kW |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Bore Code | B5 |
| Reduction Type | Single |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Standard | AGMA Service Class I |
| Torque Out @ 1750 rpm | 1206 in lb |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Motor Frame Size | B556C |
| Box Height | 6 15/16 in |
| Output Shaft | Solid |
| Material | Cast Iron, Standard Paint |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Keyway Size | 3/16 x 3/32 |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Weight | 30.1 LB |
| EAN or UPC | 781711520079 |
