Boston Gear
F7726-20-B5-H
700 Series 20:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101854816
- 2 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque | 1483 lb-in |
| Reduction Type | Single |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Box Length | 7 3/8 in |
| Media Mapping Style | F |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Shaft Assembly Code | H |
| Torque Out @ 1150 rpm | 1500 in lb |
| Worm Position | Universal |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Output Torque @ RPM | 1483 in lb @ 1750 rpm, 1500 in lb @ 1150 rpm |
| Lubrication | None |
| Series | 700 |
| Center Distance Code | 726 |
| Media Mapping Output | H |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Frame | 56C |
| Input Power Rating | 2.34 hp, 1.745 kW |
| Bore Code | B5 |
| Keyway Size | 3/16 x 3/32 |
| Motor Application | General Purpose |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Torque Out @ 1750 rpm | 1483 in lb |
| Frame Size | 56C |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Style | Right Angle |
| Rated Efficiency | 88% |
| Output Configuration | Left & Right Output |
| Output Shaft | Solid |
| Output Bore Shaft Dia. | 1.125 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Output Speed | 87.5 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Torque Rating Range [Min] | 1000 lb-in, 160 Nm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| HP @ RPM | 2 hp @ 1800 rpm |
| Washdown Duty | No |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.2 hp |
| Motor Frame Size | B556C |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Standard | AGMA Service Class I |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Motor HP | 1 hp |
| Use With | 726 |
| Center Distance | 2.625 in |
| Box Width | 5.9 in |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Family Name | F |
| Housing Material | Cast Iron |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Base Mounting Attachment | No Base |
| Fan Cooled | No |
| Box Height | 8 in |
| Material | Cast Iron, Standard Paint |
| Output Torque Rating Range [Max] | 1499 lb-in, 234 Nm |
| Input Configuration | C-Face Quilled |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Input Motor HP | 2 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Ratio | 20:1 |
| Input HP @ RPM | 1.63 hp @ 1150 rpm, 2.34 hp @ 1750 rpm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Weight | 41.1 LB |
| EAN or UPC | 781711520277 |
