Boston Gear
F7732-15E-B9-G
700 Series 15:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101871111
- 5 Input Motor hp
- 700 Series
- 3.25 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Configuration | Left Output |
| Output Torque | 2782 lb-in |
| Max. Input HP @ 100 rpm | 0.48 hp |
| Box Length | 9 in |
| Washdown Duty | No |
| Reduction Type | Single |
| Box Width | 7 9/16 in |
| Frame | 180TC, 210C |
| HP @ RPM | 3 hp @ 1800 rpm |
| Series | 700 |
| Output (Shaft or Bore) Size | 1 3/8 in |
| Base Mounting Attachment | No Base |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Bore Code | B9 |
| Bolt Centers w/ Vertical Base Kits (in) | 11.88 x 6.13 |
| Frame Size | 180TC, 210C |
| Shaft Assembly Code | G |
| Input (Shaft or Bore) Size | 1 1/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 6 1/4 in |
| Keyway Size | 1/4 x 1/8 |
| Center Distance Code | 732 |
| Fan Cooled | Yes |
| Rated Efficiency | 89% |
| Family Name | F |
| Torque Out @ 1150 rpm | 2600 in lb |
| Output Torque Rating Range [Min] | 2500 lb-in, 310 Nm |
| Motor HP | 5 hp |
| Style | Right Angle |
| Housing Material | Cast Iron |
| Standard | AGMA Service Class I |
| Input Power Rating | 5.8 hp, 4.325 kW |
| Output Torque @ RPM | 2600 in lb @ 1150 rpm, 2782 in lb @ 1750 rpm |
| Media Mapping Style | F |
| Input Motor HP | 5 |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Output Torque Rating Range [Max] | 3499 lb-in, 399 Nm |
| Use With | 732 |
| Bolt Centers w/ Std. Base Kit (in) | 9 1/2 x 6 1/8 |
| Installed Options | Fan |
| Input Configuration | C-Face Quilled |
| Base to Shaft Center Height w/Low Vert. Base Kit | 4.69 in |
| Base to Centerline of Input Shaft | 6 3/4 in |
| Ratio | 15:1 |
| Output Speed | 116.7 rpm |
| Max. Thrust Load @ 1150 rpm | 1100 lb/in |
| Torque Out @ 1750 rpm | 2782 in lb |
| Media Mapping Output | G |
| Max. Overhung Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Input HP @ RPM | 3.63 hp @ 1150 rpm, 5.8 hp @ 1750 rpm |
| Output Shaft Projection | Solid Left Output |
| Material | Cast Iron, Standard Paint |
| Max. Thrust Load @ RPM | 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm |
| Lubrication | None |
| Base to Centerline of Output Shaft | 3 1/2 in |
| Output Shaft | Solid |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Overhung Load @ 1750 rpm | 1300 lb/in |
| Motor Application | General Purpose |
| Box Height | 9 3/8 in |
| Base to Shaft Center Height w/Std. Base Kit | 6 3/4 in |
| Motor Frame Size | B9180TC210C |
| Output Bore Shaft Dia. | 1.375 in |
| Bolt Center | 7 1/2 in x 4 in |
| Center Distance | 3.25 in |
| Worm Position | Universal |
| Weight | 66.1 LB |
| EAN or UPC | 781711533451 |
