Find a Service Center
Boston Gear
FWA713-1200-B4-G
700 Series 1200:1 Ratio G Assembly Double Reduction Without Base Worm Gear Reducer
Item #101855852
- Double Reduction
- 1200:1 Ratio
- G Assembly
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Steel housings must be used for operating pressures above 210 bar (3,000 psi)
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Ratio | 1200:1 |
| Reduction Type | Double |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Box Width | 7 1/2 in |
| Bore Code | B4 |
| Base Mounting Attachment | No Base |
| Center Distance | 1.33 in |
| Output Speed | 1.5 rpm |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Output Shaft | Solid |
| Fan Cooled | No |
| Torque Out @ 1750 rpm | 330 in lb |
| Standard | AGMA Service Class I |
| Output (Shaft or Bore) Size | 5/8 in |
| Box Height | 4 21/32 in |
| Input (Shaft or Bore) Size | 1/2 in |
| Torque Out @ 1150 rpm | N/A |
| Motor Application | General Purpose |
| Input Power Rating | 0.068 hp, 0.051 kW |
| Bolt Center | 3 1/4" x 2" |
| Media Mapping Output | G |
| Output RPM @ 1750 rpm Input | 1.46 rpm |
| Family Name | FWA |
| Shaft Assembly Code | G |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Center Distance Code | 713 |
| Base to Centerline of Input Shaft | 2 19/32 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Frame Size | 42CZ |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Material | Cast Iron, Standard Paint |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Housing Material | Cast Iron |
| Input Motor HP | 0.17 |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Output Torque | 330 lb-in |
| Box Length | 4 in |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Motor HP | 0.17 hp |
| Style | Parallel Shaft |
| Input Configuration | C-Face Quilled |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Worm Position | Universal¦Parallel |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Frame | 42CZ |
| Output Shaft Projection | Solid Left Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| HP @ RPM | 0.08333333 hp @ 1800 rpm |
| Washdown Duty | No |
| Output Configuration | Left Output |
| Lubrication | None |
| Motor Frame Size | B442CZ |
| Keyway Size | 1/8 x 1/16 |
| Media Mapping Style | FWA |
| Rated Efficiency | 12% |
| Output Bore Shaft Dia. | 0.625 in |
| Weight | 18.1 LB |
| EAN or UPC | 781711523247 |
