Find a Service Center
Boston Gear
HF7713-15-B5-H-P10
700 Series 15:1 Ratio Hollow Assembly Single Reduction Worm Gear Reducer Without Base
Item #101793751
- 0.5 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Family Name | HF |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Output Shaft | Hollow |
| Box Length | 4 1/4 in |
| Bore Code | B5 |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Box Height | 4 21/32 in |
| Housing Material | Cast Iron |
| Base Mounting Attachment | No Base |
| Frame Size | 56C |
| Output (Shaft or Bore) Size | 5/8 in |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Fan Cooled | No |
| Output Torque Rating Range [Min] | 300 lb-in, 10 Nm |
| Output Torque Rating Range [Max] | 499 lb-in, 34 Nm |
| Max. Input HP @ 100 rpm | 0.049 hp |
| Bolt Center | 3 1/4" x 2" |
| Output Bore Shaft Dia. | 0.625 in |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Media Mapping Style | HF |
| Output Configuration | Hollow Output |
| Input Motor HP | 0.50 |
| Torque Out @ 1150 rpm | 262 in lb |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Input Power Rating | 0.66 hp, 0.492 kW |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Use With | 713 |
| Input Configuration | C-Face Quilled |
| Base to Centerline of Output Shaft | 1 23/32 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Ratio | 15:1 |
| Motor Application | General Purpose |
| Motor Frame Size | B556C |
| Media Mapping Hollow Bore | P10 |
| Frame | 56C |
| Output Torque | 305 lb-in |
| Keyway Size | 3/16 x 3/32 |
| Washdown Duty | No |
| Center Distance Code | 713 |
| Lubrication | None |
| Motor HP | 1/2 hp |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Output Torque @ RPM | 262 in lb @ 1150 rpm, 305 in lb @ 1750 rpm |
| Media Mapping Output | H |
| Base to Centerline of Input Shaft | 3 1/16 in |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Torque Out @ 1750 rpm | 305 in lb |
| Center Distance | 1.33 in |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Style | Right Angle |
| Rated Efficiency | 86% |
| Output Speed | 116.7 rpm |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Series | 700 |
| Box Width | 3 41/64 in |
| Input HP @ RPM | 0.37 hp @ 1150 rpm, 0.66 hp @ 1750 rpm |
| Worm Position | Universal |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Shaft Assembly Code | H |
| Output Shaft Projection | Hollow Output |
| Reduction Type | Single |
| Input (Shaft or Bore) Size | 5/8 in |
| Material | Cast Iron, Standard Paint |
| Standard | AGMA Service Class II |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Weight | 13.1 LB |
| EAN or UPC | 781711630037 |
