Find a Service Center
- 16 Diametral Pitch
- 14.5⁰ Pressure Angle
- 64 Teeths
- Non-Metallic Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Torque at 300 RPM | 71 lb/in |
| Set Screw | N/A |
| Torque at 1200 RPM | 46 lb/in |
| Face Width | 0.5 in |
| Type | A |
| Pressure Angle | 14 1/2 degrees |
| Outside Dia. [Min] | 4.125 in |
| Bore Dia. | 0.5 in |
| Torque at 200 RPM | 82 lb/in |
| O.D. | 4.13 in |
| Diametral Pitch | 16 |
| Bore Size | 0.500 in |
| Pitch Dia. | 4 in |
| Length Through Bore | 0.500 in |
| No. of Teeth | 64 |
| Bore Type | Minimum Plain Bore |
| Outside Dia. | 4.125 in |
| Torque at 900 RPM | 50 lb/in |
| Pitch Diameter | 4 in |
| Material | Non-Metallic |
| Rated Torque [Max] | 42 @ 1800 rpm |
| Hardened Teeth | Without Hardened Teeth |
| Keyway | N/A |
| Torque at 1800 RPM | 42 lb/in |
| Hub Dia. | N/A |
| Set Screw Size | N/A |
| Torque at 600 RPM | 57 lb/in |
| No. of Teeths | 64 |
| Origin | Reborable |
| Weight | 0.321 LB |
| EAN or UPC | 781711090060 |
