Find a Service Center
Alternate Products
- Finished Steel Gear
- 20 Diametral Pitch
- 20.0° Pressure Angle
- 40 Teeth
- 2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Base oil viscosity: 500 SUS @ 100 °F
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
| Bore Size | 0.500 in |
| Hub Dia. | 1.72 in |
| Torque at 300 RPM | 157 lb/in |
| Diametral Pitch | 20 |
| Material | Steel |
| Torque at 600 RPM | 130 lb/in |
| Torque at 200 RPM | 168 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Origin | Finished Bore |
| Outside Dia. [Min] | 2.1 in |
| Set Screw Size | 1/2 |
| Bore Type | Bored to Size |
| Pressure Angle | 20 degrees |
| Outside Dia. | 2.1 in |
| Pitch Diameter | 2 in |
| Torque at 1200 RPM | 96.6 lb/in |
| Type | A |
| No. of Teeth | 40 |
| Keyway | w/Setscrew |
| Set Screw | Yes |
| Torque at 900 RPM | 111 lb/in |
| Length Through Bore | 1.000 in |
| Torque at 1800 RPM | 77 lb/in |
| Weight | 0.751 LB |
| EAN or UPC | 781711461389 |
