Find a Service Center
- 24 Diametral Pitch
- 20⁰ Pressure Angle
- 23 Teeths
- Molded Delrin Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Pitch Diameter | 0.958 in |
| Torque at 300 RPM | 13 lb/in |
| Type | A |
| Pitch Dia. | 0.959 in |
| No. of Teeth | 23 |
| Hub Dia. | 0.55 in |
| Keyway | w/o Keyway, w/o Setscrew |
| Torque at 200 RPM | 13.7 lb/in |
| Length Through Bore | 0.5625 in |
| Origin | Reborable |
| Bore Size | 0.1875 in |
| Outside Dia. | 1.042 in |
| Material | Molded Delrin |
| Hardened Teeth | Without Hardened Teeth |
| Set Screw | N/A |
| No. of Teeths | 23 |
| Bore Dia. | 0.188 in |
| Torque at 900 RPM | 10.6 lb/in |
| Torque at 600 RPM | 11.7 lb/in |
| Torque at 1800 RPM | 8.4 lb/in |
| Set Screw Size | N/A |
| Bore Type | Minimum Plain Bore |
| O.D. | 1.042 in |
| Pressure Angle | 20 degrees |
| Outside Dia. [Min] | 1.042 in |
| Diametral Pitch | 24 |
| Torque at 1200 RPM | 9.8 lb/in |
| Face Width | 0.25 in |
| Weight | 0.011 LB |
| EAN or UPC | 781711540428 |
