Find a Service Center
- Molded Delrin Material
- 36 Teeth
- 48 Diametral Pitch
- 0.792 in Outside Diameter
- 20⁰ Pressure Angle
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Bore Dia. | 0.188 in |
| O.D. | 0.792 in |
| Set Screw | N/A |
| Hardened Teeth | Without Hardened Teeth |
| Origin | Reborable |
| Pressure Angle | 20 degrees |
| Diametral Pitch | 48 |
| Torque at 1800 RPM | N/A |
| Material | Molded Delrin |
| Pitch Diameter | 0.75 in |
| Outside Dia. | 0.79 in |
| Torque at 900 RPM | N/A |
| Pitch Dia. | 0.75 in |
| Set Screw Size | N/A |
| Length Through Bore | 0.375 in |
| Bore Size | 0.1875 in |
| Torque at 600 RPM | N/A |
| Torque at 1200 RPM | N/A |
| Hub Dia. | 0.55 in |
| No. of Teeths | 36 |
| Torque at 300 RPM | N/A |
| Face Width | 0.125 in |
| Outside Dia. [Min] | 0.79 in |
| Bore Type | Minimum Plain Bore |
| Torque at 200 RPM | N/A |
| No. of Teeth | 36 |
| Type | A |
| Keyway | w/o Keyway, w/o Setscrew |
| Weight | 0.011 LB |
| EAN or UPC | 781711539200 |
