Find a Service Center
- 24 Diametral Pitch
- 20⁰ Pressure Angle
- 17 Teeths
- Molded Delrin Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Hub Dia. | 0.55 in |
| Type | A |
| Set Screw | N/A |
| Outside Dia. | 0.792 in |
| No. of Teeths | 17 |
| Face Width | 0.25 in |
| No. of Teeth | 17 |
| Torque at 1800 RPM | 6.2 lb/in |
| Pitch Diameter | 0.708 in |
| Hardened Teeth | Without Hardened Teeth |
| Keyway | w/o Keyway, w/o Setscrew |
| Torque at 200 RPM | 9.1 lb/in |
| O.D. | 0.792 in |
| Torque at 900 RPM | 7.5 lb/in |
| Bore Size | 0.1875 in |
| Pitch Dia. | 0.709 in |
| Torque at 1200 RPM | 7 lb/in |
| Material | Molded Delrin |
| Torque at 600 RPM | 8.1 lb/in |
| Set Screw Size | N/A |
| Outside Dia. [Min] | 0.792 in |
| Length Through Bore | 0.5625 in |
| Diametral Pitch | 24 |
| Pressure Angle | 20 degrees |
| Bore Dia. | 0.188 in |
| Torque at 300 RPM | 8.8 lb/in |
| Origin | Reborable |
| Bore Type | Minimum Plain Bore |
| Weight | 0.021 LB |
| EAN or UPC | 781711540688 |
