Find a Service Center
- Molded Delrin Material
- 100 Teeth
- 48 Diametral Pitch
- 2.125 in Outside Diameter
- 20⁰ Pressure Angle
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| No. of Teeth | 100 |
| Pressure Angle | 20 degrees |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 200 RPM | 27.86667 lb/in |
| Bore Type | Minimum Plain Bore |
| Face Width | 0.125 in |
| Pitch Dia. | 2.083 in |
| Pitch Diameter | 2.083 in |
| Keyway | w/o Keyway, w/o Setscrew |
| Set Screw | N/A |
| Torque at 1800 RPM | 10.5 lb/in |
| Style | Hub |
| Outside Dia. [Min] | 2.125 in |
| Torque at 300 RPM | 25.03333 lb/in |
| Length Through Bore | 0.375 in |
| Set Screw Size | N/A |
| Material | Molded Delrin |
| Bore Dia. | 0.25 in |
| Outside Dia. | 2.125 in |
| Origin | Reborable |
| Type | B |
| Torque at 900 RPM | 15.53333 lb/in |
| Torque at 1200 RPM | 13.03333 lb/in |
| No. of Teeths | 100 |
| Hub Dia. | 0.61 in |
| Bore Size | 0.250 in |
| Diametral Pitch | 48 |
| O.D. | 2.125 in |
| Torque at 600 RPM | 19.16667 lb/in |
| Weight | 0.021 LB |
| EAN or UPC | 781711539798 |
