Find a Service Center
- Gray Iron Material
- Minimum Plain Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Gears are rated in accordance with AGMA standards
- When you think "Special" Gears - Think Browning
- Browning Minimum Bore Spur Gear
| No. of Teeth | 54 |
| Outside Diameter (in) | 9.33 |
| Overall Length (in) | 3.5 |
| Bore Size (in) | 1.25 |
| Bore (Min) (in) | 1.25 |
| Length Through Bore (in) | 3.5 |
| Number of Teeth/Threads | 54 |
| Standards Met | AGMA |
| Face Width (in) | 2 |
| Pitch Diameter | 9 in |
| Pitch Diameter (in) | 9 |
| Material | Gray Iron |
| Hub Diameter (in) | 3.375 |
| Bore (Max) (in) | 2.125 |
| Gear Construction | Spoked |
| Hub Projection (in) | 1.5 |
| Bore Type | Minimum Plain Bore |
| Diametral Pitch | 6 |
| Pressure Angle | 20 degrees |
| Bushing Bore Size (in) | 1.2500 to 2.1250 |
| Length Through Bore | 3.500 in |
| Weight | 19.8 LB |
| EAN or UPC | 662289042951 |
