Find a Service Center
- Gray Iron Material
- Bushed Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Gears are rated in accordance with AGMA standards
- When you think "Special" Gears - Think Browning
- Browning Split Taper Bushed Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
| Bore Type | Bushed Bore |
| Length Through Bore (in) | 2.1875 |
| Pitch Diameter | 9 in |
| Pressure Angle | 20 degrees |
| Bore (Max) (in) | 1.75 |
| Length Through Bore | 2.1875 in |
| Hub Projection (in) | 0.4375 |
| Bore (Min) (in) | 0.5 |
| Standards Met | AGMA |
| Material | Gray Iron |
| Number of Teeth/Threads | 72 |
| Bore Size (in) | 0.5 |
| Pitch Diameter (in) | 9 |
| No. of Teeth | 72 |
| Overall Length (in) | 2.1875 |
| Face Width (in) | 1.5 |
| Hub Diameter (in) | 3 |
| Diametral Pitch | 8 |
| Outside Diameter (in) | 9.25 |
| Weight | 11.36 LB |
| EAN or UPC | 662289207961 |
