Designed for flush mounting with machined bases for light loads and two bolt holes.
features
Powder coated epoxy cast iron housing with extended inner ring bearings
Zone hardened inner ring with 120° spacing setscrew with diamond faceted setscrews
Single lip contact seal
Unique land riding retainer design provides superior pocket clearance that allows for 360° grease circulation around the rolling elements resulting in better retained and utilized lubrication.
Sealmaster® exclusive lock pin & dimple for direct lubrication and anti-rotation
Maximum Operating Temperature
220
Insert Material
52100 Bearing Steel, Black Oxided
Inner Race Heat Treat Method
Zone-Hardened
Radial Dynamic Load Capacity (lb)
4381
Housing Width (in)
3.25
Lubrication
Lithium Complex NLGI 2 Grease
Length Through Bore (in)
1.594
Measure Units
Inch
Housing Color
Gray
Internal Clearance
Standard
Overall Height to Inner Ring (in)
1.563
Seal Type
Single Lip Contact
Bearing Design
Non-Expansion
Retainer Type
Land Riding
Overall Width (in)
3.25
Bolt Hole Spacing
4 19/32 in
Radial Static Load Capacity (lb)
2567
Bolt Size
0.438 in
Platform
Gold Line Ball Bearing
Inner Race Length
1.594 in
Bolt Size (in)
0.4375
Housing Length
5 9/16 in
Pilot Configuration
No Pilot
Duty Series
Standard
End Cap
No
Inch/Metric
Inch
Centerline to Front Face (in)
0.875
Operating Temperature [Max]
220 °F
Bolt Center-to-Center Length
4.594 in
Speed [Max]
5450 rpm
Foot Height (in)
0.531
Inner Ring O.D.
1.594 in
Bolt Circle Dia.
4 19/32 in
Locking Type
Set Screws
Centerline to Front Face
0.875 in
Expansion
No
Bore Shape
Straight
Replaceable Insert
Yes
Bearing Insert Coating
Black Oxide
Housing Width
3.25 in
Radial Dynamic Load Capacity
4381 lb
Bore Size - Inch
1.25
Overall Length
5.563 in
Housing Base
Solid
Outer Ring Land Profile
Standard
Overall Height to Inner Ring
1.563 in
Inner Race Length (in)
1.594
Bearing Type
Ball Bearing
End Type
Open End
Series
SFT
Angle of Misalignment
±2°
Bolt Center-to-Center Length (in)
4.5940
Overall Width
3.25 in
Overall Height
1.563 in
Housing Material
Cast Iron
Misalignment Type
Static Only
Shaft Dia.
1.25 in
Overall Height (in)
1.5625
Overall Length (in)
5.563
Inner Ring OD (in)
1.594
Mounted Unit Duty
Standard Duty
Bore Size
1.25 in
Flange Type
2-Bolt Flange
Locking Device
Setscrew Locking Collar
Foot Height
0.531 in
Relubricatable
Yes
Housing Construction
One Piece
Insert No.
1-14C
Weight
2.15 LB
EAN or UPC
662461022627
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
