Find a Service Center
Alternate Products
- Series E Radially Assembled Retaining Ring
- 0.375 in Shaft Size
- 0.035 in Thick
- Carbon Steel
- Zinc Dichromate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Series | E |
| Shaft Dia. | 0.375 in |
| Finish | Zinc Dichromate |
| Tape Length of Stack | 8.75 in |
| Outside Dia. | 0.66 in |
| Tape Width | 1 1/4 in |
| Clearance Installed in Groove | 0.68 in |
| Plating | Zinc |
| Thrust Groove Safety Factor of 2 Pg Lb | 315 lbf |
| Groove Depth | 0.036 in |
| Limiting Speed | 20000 rpm |
| Inch/Metric | Inch |
| Tape Rings Stack | 250 |
| Edge Margin | 0.072 in |
| RPM Limit | 20000 rpm |
| Material | Carbon Steel |
| Length of Stack | 8.75 in |
| Type | Radially Assembled |
| Thickness | 0.035 in |
| Package Type | Stacked |
| Load Capacity [Max] | 690 lbs |
| Thrust Ring Safety Factor of 3 Pr Lb | 700 lbf |
| Weight | 0.015 LB |
| EAN or UPC | 721717007174 |
