Find a Service Center
- 1.125 in Shaft Diameter
- 1.874 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Min] | -5 °F |
| Case Material | Steel |
| Case Design | Metal Case |
| Seal Type | Oil |
| Solid | Yes |
| Shaft Dia. | 1.125 in |
| Spring Type | Garter |
| Installation | Housing Press Fit |
| Construction | CRW1 |
| Pressure | 10 psi |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Speed | 0.07 ft/min |
| Lubricant | Oil or Grease |
| Housing Bore Dia. | 1.874 in |
| Seal Design | SKF Wave |
| Spring Material | Carbon Steel |
| Overall Width | 0.25 in |
| Bore Sealant | Bore Tite |
| Lip Type | Single Lip |
| Design | CRW1 |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 390 °F |
| Weight | 0.082 LB |
| EAN or UPC | 85311500968 |
