Find a Service Center
- 1.18 in Shaft Diameter
- 1.85 in Housing Bore Diameter
- 0.28 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Lubricant | Oil or Grease |
| Housing Bore Dia. | 1.85 in, 47 mm |
| Operating Temperature [Min] | -40 °F |
| Case Design | Rubber Outside Diameter |
| Shaft Dia. | 1.18 in, 30 mm |
| Speed | 0.05 ft/min |
| Operating Temperature [Max] | 210 °F |
| Lip Type | Single Lip |
| Installation | Housing Press Fit |
| Design | HMS4 |
| Lip Material | Nitrile Rubber (NBR) |
| Overall Width | 0.28 in, 7 mm |
| Pressure | 7 psi |
| Weight | 0.035 LB |
| EAN or UPC | 85311886680 |
