Find a Service Center
Alternate Products
- 1.25 in Shaft Diameter
- 1.687 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Min] | -40 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Installation | Housing Press Fit |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Construction | CRW1 |
| Overall Width | 0.25 in |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 1.687 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Max] | 225 °F |
| Case Construction | Steel Case w/o Inner Case |
| Seal Design | SKF Wave |
| Shaft Dia. | 1.25 in |
| Seal Application | General Purpose |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Case Design | Metal Case |
| Lip Style | Internal |
| Spring Material | Carbon Steel Garter |
| Seal Width | 0.25 in |
| Solid | Yes |
| Temperature Range [Min] | -65 °F |
| Pressure | 10 psi |
| Seal Type | Oil |
| Design | CRW1 |
| Surface Speed [Nom] | 1,474 ft/min |
| Weight | 0.039 LB |
| EAN or UPC | 85311010917 |
