Find a Service Center
Alternate Products
- 1.25 in Shaft Diameter
- 2.84 in Housing Bore Diameter
- 0.38 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Speed | 0.05 ft/min |
| Case Design | Rubber Outside Diameter |
| Lip Style | Internal |
| Case Material | Rubber-Covered Steel |
| Installation | Housing Press Fit |
| Overall Width | 0.38 in, 9.53 mm |
| Seal Width | 3/8 in |
| Temperature Range [Min] | -65 °F |
| Case Construction | Rubber Covered Steel Case |
| Lip Type | Dual Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Inch/Metric | Inch |
| Pressure | 7 psi |
| Spring Material | Carbon Steel |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Construction | HMSA7 |
| Seal Application | Light Dirt Exclusion |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Max] | 225 °F |
| Operating Temperature [Min] | -40 °F |
| Housing Bore Dia. | 2.84 in, 72 mm |
| Operating Temperature [Max] | 210 °F |
| Shaft Dia. | 1.25 in, 31.75 mm |
| Spring Type | Garter |
| Design | HMSA7 |
| Seal Design | Molded Design |
| Lubricant | Oil or Grease |
| Weight | 0.128 LB |
| EAN or UPC | 85311899963 |
