Find a Service Center
- 1.75 in Shaft Diameter
- 2.374 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 2,063 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Inch/Metric | Inch |
| Spring Type | Garter |
| Case Design | Metal Case |
| Pressure | 10 psi |
| Construction | CRW1 |
| Temperature Range [Min] | -65 °F |
| Installation | Housing Press Fit |
| Family Name | Single Lip With Spring Shaft Seal |
| Solid | Yes |
| Case Construction | Steel Case w/o Inner Case |
| Lip Type | Single Lip |
| Case Material | Steel |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Max] | 225 °F |
| Shaft Dia. | 1.75 in |
| Seal Width | 0.313 in |
| Overall Width | 0.313 in |
| Speed | 0.07 ft/min |
| Design | CRW1 |
| Bore Sealant | Bore Tite |
| Lip Style | Internal |
| Lubricant | Oil or Grease |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Spring Material | Carbon Steel |
| Housing Bore Dia. | 2.374 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Min] | -40 °F |
| Weight | 0.088 LB |
| EAN or UPC | 85311018296 |
