Find a Service Center
Alternate Products
- 0.625 in Shaft Diameter
- 0.999 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Pressure | 10 psi |
| Construction | CRW1 |
| Operating Temperature [Max] | 210 °F |
| Seal Application | General Purpose |
| Case Design | Metal Case |
| Lip Style | Internal |
| Spring Material | Carbon Steel |
| Seal Design | SKF Wave |
| Case Material | Steel |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Material | Nitrile Rubber (NBR) |
| Bore Sealant | Bore Tite |
| Seal Type | Oil |
| Overall Width | 0.25 in |
| Spring Type | Garter |
| Temperature Range [Max] | 225 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Housing Bore Dia. | 0.999 in |
| Seal Width | 0.25 in |
| Solid | Yes |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 0.625 in |
| Design | CRW1 |
| Temperature Range [Min] | -65 °F |
| Lip Type | Single Lip |
| Surface Speed [Nom] | 737 ft/min |
| Inch/Metric | Inch |
| Lubricant | Oil or Grease |
| Speed | 0.07 ft/min |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Case Construction | Steel Case w/o Inner Case |
| Weight | 0.062 LB |
| EAN or UPC | 85311004251 |
