Find a Service Center
Alternate Products
- 0.938 in Shaft Diameter
- 1.752 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Speed | 0.07 ft/min |
| Spring Material | Carbon Steel |
| Temperature Range [Max] | 225 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Shaft Dia. | 0.938 in |
| Installation | Housing Press Fit |
| Case Construction | Steel Case w/o Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Temperature Range [Min] | -65 °F |
| Lip Style | Internal |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Seal Design | SKF Wave |
| Overall Width | 0.25 in |
| Seal Width | 1.752 in |
| Housing Bore Dia. | 1.752 in |
| Case Material | Steel |
| Inch/Metric | Inch |
| Case Design | Metal Case |
| Surface Speed [Nom] | 1,106 ft/min |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Type | Single Lip |
| Design | CRW1 |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Bore Sealant | Bore Tite |
| Pressure | 10 psi |
| Seal Type | Oil |
| Construction | CRW1 |
| Spring Type | Garter |
| Operating Temperature [Max] | 210 °F |
| Weight | 0.077 LB |
| EAN or UPC | 85311007290 |
| NSN Number | 5330-00-360-4255 |
