Find a Service Center
- 10.25 in Shaft Diameter
- 12 in Housing Bore Diameter
- 0.63 in Overall Width
- Carboxylated Nitrile Rubber (XNBR) Lip Material
- Inch
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Surface Speed [Nom] | 5,000 ft/min |
| Overall Width | 0.63 in, 15.88 mm |
| Design | HDS3 |
| Pressure | 15 psi |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Carboxylated Nitrile Rubber (XNBR) |
| Speed | 0.1 ft/min |
| Construction | HDS3 |
| Cover/Compensation Ring/Plate Required | No |
| Installation | Housing Press Fit |
| Shaft Dia. | 10.25 in, 260.35 mm |
| Operating Temperature [Min] | -40 °F |
| Lip Style | Internal |
| Case Construction | Steel Case w/Inner Case w/4 Adjustable Lugs |
| Case Design | Metal Case, Spacer Lugs |
| Seal Design | Assembled Design |
| Inch/Metric | Inch |
| Housing Bore Dia. | 12 in, 304.8 mm |
| Spring Material | Stainless Steel |
| Temperature Range [Max] | 250 °F |
| Temperature Range [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Case Material | Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Type | Single Lip |
| Spring Type | Garter Spring Cover |
| Weight | 4.327 LB |
| EAN or UPC | 85311089777 |
