- 1.125 in Shaft Diameter
- 1.630 in Housing Bore Diameter
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
caution
- Not generally for oil retention
| Lubricant | Oil or Grease |
| Case Design | Rubber Outside Diameter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Design | HMS4N |
| Housing Bore Dia. | 1 in, 41 mm |
| Seal Design | Molded Design |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Max] | 250 °F |
| Shaft Dia. | 1 in, 28 mm |
| Case Construction | Steel Case w/Inner Case |
| Spring Material | Carbon Steel Garter |
| Operating Temperature [Min] | -40 °F |
| Installation | Housing Press Fit |
| Inch/Metric | Metric |
| Surface Speed [Nom] | 3,600 ft/min |
| Temperature Range [Min] | -40 °F |
| Overall Width | 7 mm |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Construction | HMS4N |
| Weight | 0.076 LB |
| EAN or UPC | 85311009560 |

