- 1.14 in Shaft Diameter
- 1.77 in Housing Bore Diameter
- 0.31 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Speed | 0.05 ft/min |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Installation | Housing Press Fit |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Spring Material | Carbon Steel Garter |
| Seal Application | Light Dirt Exclusion |
| Surface Speed [Nom] | 3,600 ft/min |
| Case Design | Rubber Outside Diameter |
| Lip Style | Internal |
| Construction | HMSA7 |
| Lubricant | Oil or Grease |
| Seal Design | Molded Design |
| Housing Bore Dia. | 1.77 in, 45 mm |
| Temperature Range [Max] | 225 °F |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Dual Lip |
| Case Construction | Rubber Covered Steel Case |
| Overall Width | 0.31 in, 8 mm |
| Shaft Dia. | 1.14 in, 29 mm |
| Inch/Metric | Metric |
| Temperature Range [Min] | -65 °F |
| Operating Temperature [Min] | -40 °F |
| Design | HMSA7 |
| Pressure | 7 psi |
| Weight | 0.083 LB |
| EAN or UPC | 85311009942 |

