Find a Service Center
- 1.5 in Shaft Diameter
- 2.441 in Housing Bore
- 0.313 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Solid | Yes |
| Case Construction | Steel Case w/o Inner Case |
| Installation | Housing Press Fit |
| Case Design | Metal Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Overall Width | 0.313 in |
| Temperature Range [Max] | 400 °F |
| Shaft Dia. | 1.5 in |
| Seal Design | SKF Wave |
| Surface Speed [Nom] | 3,600 ft/min |
| Operating Temperature [Min] | -5 °F |
| Construction | CRW1 |
| Seal Application | General Purpose |
| Housing Bore Dia. | 2.441 in |
| Lip Type | Single Lip |
| Seal Type | Oil |
| Design | CRW1 |
| Bore Sealant | Bore Tite |
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal |
| Spring Type | Garter |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Inch |
| Case Material | Steel |
| Operating Temperature [Max] | 390 °F |
| Spring Material | Carbon Steel |
| Pressure | 10 psi |
| Speed | 0.07 ft/min |
| Lubricant | Oil or Grease |
| Weight | 0.092 LB |
| EAN or UPC | 85311015233 |
