Find a Service Center
- 1.5 in Shaft Diameter
- 2.835 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Style | Internal |
| Lip Type | Single Lip |
| Spring Material | Carbon Steel |
| Installation | Housing Press Fit |
| Design | CRW1 |
| Seal Design | SKF Wave |
| Case Design | Metal Case |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Min] | -65 °F |
| Seal Application | General Purpose |
| Surface Speed [Nom] | 1,768 ft/min |
| Inch/Metric | Inch |
| Lip Material | Nitrile Rubber (NBR) |
| Bore Sealant | Bore Tite |
| Spring Type | Garter |
| Construction | CRW1 |
| Lubricant | Oil or Grease |
| Speed | 0.07 ft/min |
| Case Material | Steel |
| Operating Temperature [Min] | -40 °F |
| Pressure | 10 psi |
| Temperature Range [Max] | 225 °F |
| Seal Type | Oil |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Max] | 210 °F |
| Shaft Dia. | 1.5 in |
| Housing Bore Dia. | 2.835 in |
| Solid | Yes |
| Case Construction | Steel Case w/o Inner Case |
| Overall Width | 0.313 in |
| Weight | 0.104 LB |
| EAN or UPC | 85311015417 |
