Find a Service Center
- 1.5 in Shaft Diameter
- 2.835 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Min] | -40 °F |
| Pressure | 10 psi |
| Case Design | Metal Case |
| Shaft Dia. | 1.5 in |
| Lubricant | Oil or Grease |
| Temperature Range [Max] | 225 °F |
| Lip Type | Single Lip |
| Overall Width | 0.313 in |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel |
| Lip Style | Internal |
| Spring Type | Garter |
| Seal Type | Oil |
| Temperature Range [Min] | -65 °F |
| Inch/Metric | Inch |
| Lip Material | Nitrile Rubber (NBR) |
| Design | CRW1 |
| Case Material | Steel |
| Surface Speed [Nom] | 1,768 ft/min |
| Installation | Housing Press Fit |
| Cover/Compensation Ring/Plate Required | No |
| Speed | 0.07 ft/min |
| Solid | Yes |
| Bore Sealant | Bore Tite |
| Housing Bore Dia. | 2.835 in |
| Construction | CRW1 |
| Case Construction | Steel Case w/o Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Application | General Purpose |
| Seal Design | SKF Wave |
| Weight | 0.104 LB |
| EAN or UPC | 85311015417 |
