Find a Service Center
- 1.563 in Shaft Diameter
- 2.062 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Solid | Yes |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Shaft Dia. | 1.563 in |
| Case Design | Metal Case |
| Construction | CRW1 |
| Design | CRW1 |
| Lip Type | Single Lip |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Case Construction | Steel Case w/o Inner Case |
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 390 °F |
| Housing Bore Dia. | 2.062 in |
| Seal Design | SKF Wave |
| Operating Temperature [Min] | -5 °F |
| Lubricant | Oil or Grease |
| Lip Style | Internal |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Pressure | 10 psi |
| Temperature Range [Max] | 400 °F |
| Installation | Housing Press Fit |
| Overall Width | 0.25 in |
| Temperature Range [Min] | -40 °F |
| Weight | 0.079 LB |
| EAN or UPC | 85311015660 |
