- 1.594 in Shaft Diameter
- 2.125 in Housing Bore
- 0.313 in Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Cover/Compensation Ring/Plate Required | No |
| Overall Width | 0.313 in |
| Temperature Range [Max] | 300 °F |
| Inch/Metric | Inch |
| Lubricant | Oil or Grease |
| Operating Temperature [Max] | 302 °F |
| Temperature Range [Min] | -40 °F |
| Seal Design | SKF Wave |
| Surface Speed [Nom] | 1,879 ft/min |
| Speed | 0.07 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Min] | -40 °F |
| Construction | CRW1 |
| Seal Application | General Purpose |
| Housing Bore Dia. | 2.125 in |
| Pressure | 10 psi |
| Installation | Housing Press Fit |
| Case Design | Metal Case |
| Spring Material | Carbon Steel Garter |
| Lip Type | Single Lip |
| Design | CRW1 |
| Lip Style | Internal |
| Seal Type | Oil |
| Solid | Yes |
| Shaft Dia. | 1.594 in |
| Case Construction | Steel Case w/o Inner Case |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Weight | 0.081 LB |
| EAN or UPC | 85311016421 |

