- 1.619 in Shaft Diameter
- 2 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Shaft Dia. | 1.619 in |
| Seal Type | Oil |
| Speed | 0.07 ft/min |
| Case Construction | Steel Case w/o Inner Case |
| Overall Width | 0.25 in |
| Design | CRW1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Design | SKF Wave |
| Pressure | 10 psi |
| Bore Sealant | Bore Tite |
| Seal Application | General Purpose |
| Housing Bore Dia. | 2 in |
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 390 °F |
| Cover/Compensation Ring/Plate Required | No |
| Case Design | Metal Case |
| Lip Type | Single Lip |
| Surface Speed [Nom] | 1,916 ft/min |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Operating Temperature [Min] | -5 °F |
| Lip Style | Internal |
| Temperature Range [Min] | -40 °F |
| Temperature Range [Max] | 400 °F |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Spring Material | Carbon Steel |
| Solid | Yes |
| Case Material | Steel |
| Spring Type | Garter |
| Construction | CRW1 |
| Weight | 0.039 LB |
| EAN or UPC | 85311086523 |

