Find a Service Center
- 1 in Shaft Diameter
- 2 in Housing Bore Diameter
- 15 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Temperature Range [Max] | 225 °F |
| Pressure | 10 psi |
| Lip Style | Internal |
| Lip Type | Dual Lip |
| Design | CRWHA3 |
| Housing Bore Dia. | 2 in, 62 mm |
| Construction | CRWHA3 |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Min] | -65 °F |
| Shaft Dia. | 1 in, 41 mm |
| Speed | 0.07 ft/min |
| Overall Width | 15 mm |
| Lubricant | Oil or Grease |
| Case Design | Metal Case, Inner Case |
| Cover/Compensation Ring/Plate Required | No |
| Seal Design | Molded Design |
| Inch/Metric | Metric |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Material | Nitrile Rubber (NBR) |
| Case Construction | Steel Case w/Inner Case |
| Seal Application | Dirt Exclusion |
| Spring Material | Carbon Steel Garter |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Weight | 0.209 LB |
| EAN or UPC | 85311016858 |
