Find a Service Center
- 1 in Shaft Diameter
- 2 in Housing Bore Diameter
- 7 mm Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Overall Width | 7 mm |
| Lip Type | Dual Lip |
| Lubricant | Grease |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Housing Bore Dia. | 2 in, 58 mm |
| Operating Temperature [Max] | 302 °F |
| Spring Material | Carbon Steel Garter |
| Case Design | Metal Case |
| Seal Design | Assembled Design |
| Seal Application | Light Dirt Exclusion |
| Inch/Metric | Metric |
| Temperature Range [Max] | 300 °F |
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal / External |
| Construction | HMSA96 |
| Installation | Housing Press Fit |
| Case Construction | Steel Case w/o Inner Case |
| Temperature Range [Min] | -40 °F |
| Operating Temperature [Min] | -40 °F |
| Speed | 0.02 ft/min |
| Shaft Dia. | 1 in, 43 mm |
| Design | HMA8 |
| Pressure | 3 psi |
| Weight | 0.078 LB |
| EAN or UPC | 85311174534 |
