Find a Service Center
- 1 in Shaft Diameter
- 2 in Housing Bore Diameter
- 8 mm Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Housing Bore Dia. | 2 in, 67 mm |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -40 °F |
| Lip Type | Dual Lip |
| Seal Application | Light Dirt Exclusion |
| Spring Material | Carbon Steel Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Style | Internal |
| Seal Design | Molded Design |
| Inch/Metric | Metric |
| Case Construction | Rubber Covered Steel Case |
| Lubricant | Oil or Grease |
| Pressure | 7 psi |
| Shaft Dia. | 1 in, 45 mm |
| Overall Width | 8 mm |
| Case Design | Rubber Outside Diameter |
| Design | HMSA7 |
| Construction | HMSA7 |
| Operating Temperature [Min] | -40 °F |
| Operating Temperature [Max] | 302 °F |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Temperature Range [Max] | 400 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Speed | 0.05 ft/min |
| Weight | 0.064 LB |
| EAN or UPC | 85311264310 |
