Find a Service Center
- 1.875 in Shaft Diameter
- 2.623 in Housing Bore
- 0.313 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Max] | 400 °F |
| Pressure | 10 psi |
| Overall Width | 0.313 in |
| Lip Style | Internal |
| Case Construction | Steel Case w/o Inner Case |
| Housing Bore Dia. | 2.623 in |
| Spring Type | Garter |
| Lip Type | Single Lip |
| Surface Speed [Nom] | 2,211 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Bore Sealant | Bore Tite |
| Seal Type | Oil |
| Seal Application | General Purpose |
| Case Design | Metal Case |
| Lubricant | Oil or Grease |
| Seal Design | SKF Wave |
| Installation | Housing Press Fit |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Spring Material | Carbon Steel |
| Construction | CRW1 |
| Operating Temperature [Min] | -5 °F |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Inch |
| Shaft Dia. | 1.875 in |
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 390 °F |
| Case Material | Steel |
| Design | CRW1 |
| Solid | Yes |
| Weight | 0.089 LB |
| EAN or UPC | 85311020183 |
