Find a Service Center
- 1.875 in Shaft Diameter
- 2.623 in Housing Bore
- 0.313 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Solid | Yes |
| Spring Material | Carbon Steel |
| Surface Speed [Nom] | 2,211 ft/min |
| Lip Type | Single Lip |
| Case Design | Metal Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Overall Width | 0.313 in |
| Construction | CRW1 |
| Operating Temperature [Min] | -5 °F |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 2.623 in |
| Case Construction | Steel Case w/o Inner Case |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Max] | 390 °F |
| Lip Style | Internal |
| Speed | 0.07 ft/min |
| Bore Sealant | Bore Tite |
| Seal Design | SKF Wave |
| Inch/Metric | Inch |
| Spring Type | Garter |
| Installation | Housing Press Fit |
| Lubricant | Oil or Grease |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Pressure | 10 psi |
| Seal Type | Oil |
| Temperature Range [Max] | 400 °F |
| Case Material | Steel |
| Design | CRW1 |
| Shaft Dia. | 1.875 in |
| Seal Application | General Purpose |
| Weight | 0.089 LB |
| EAN or UPC | 85311020183 |
