Find a Service Center
- Radial Shaft Seal
- 20 mm Shaft Diameter
- 32 mm Housing Bore Diameter
- 8 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Spring Material | Carbon Steel Garter |
| Lip Style | Internal |
| Surface Speed [Nom] | 3,600 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Max] | 250 °F |
| Shaft Dia. | 20 mm |
| Overall Width | 8 mm |
| Temperature Range [Min] | -40 °F |
| Seal Type | Grease |
| Lip Type | Single Lip w/Spring |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@1000-3600 |
| Seal Application | General Purpose |
| Case Construction | Rubber Covered Steel Case |
| Inch/Metric | Metric |
| Pressure | 10 psi |
| Seal Design | Standard |
| Construction | HMS4 |
| Housing Bore Dia. | 32 mm |
| Weight | 0.07 LB |
| EAN or UPC | 85311238434 |
