- 2 in Shaft Diameter
- 4 in Housing Bore Diameter
- 22 mm Overall Width
- Fluoro Rubber (FKM) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- High pumping rate
- With garter spring
- Accommodate misalignment
| Temperature Range [Min] | -40 °F |
| Lip Style | Internal |
| Seal Application | Light Dirt Exclusion |
| Installation | Housing Press Fit |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -5 °F |
| Case Construction | Steel Case w/o Inner Case |
| Design | HMSA25 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Type | Triple Lip w/One Spring |
| Seal Design | Assembled Design |
| Spring Material | Carbon Steel Garter |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Metric |
| Construction | HMSA25 |
| Operating Temperature [Max] | 390 °F |
| Housing Bore Dia. | 4 in, 114 mm |
| Shaft Dia. | 2 in, 60 mm |
| Overall Width | 22 mm |
| Lip Material | Fluoro Rubber (FKM) |
| Temperature Range [Max] | 400 °F |
| Weight | 0.382 LB |
| EAN or UPC | 85311166706 |

