Find a Service Center
- 2.5 in Shaft Diameter
- 3.25 in Housing Bore Diameter
- 0.44 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Spring Type | Garter |
| Solid | Yes |
| Seal Type | Oil |
| Construction | CRWH1 |
| Lubricant | Oil or Grease |
| Seal Design | SKF Wave |
| Inch/Metric | Inch |
| Operating Temperature [Min] | -5 °F |
| Installation | Housing Press Fit |
| Lip Style | Internal |
| Temperature Range [Min] | -40 °F |
| Overall Width | 0.438 in |
| Lip Type | Single Lip |
| Case Design | Metal Case, Inner Case |
| Speed | 0.07 ft/min |
| Design | CRWH1 |
| Cover/Compensation Ring/Plate Required | No |
| Bore Sealant | Bore Tite |
| Surface Speed [Nom] | 3,600 ft/min |
| Housing Bore Dia. | 3.251 in |
| Temperature Range [Max] | 400 °F |
| Case Material | Steel |
| Shaft Dia. | 2.5 in |
| Spring Material | Carbon Steel |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Case Construction | Steel Case w/Inner Case |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Operating Temperature [Max] | 390 °F |
| Weight | 0.16 LB |
| EAN or UPC | 85311026888 |
