Find a Service Center
Alternate Products
- 2.63 in Shaft Diameter
- 3.25 in Housing Bore Diameter
- 0.44 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Type | Oil |
| Installation | Housing Press Fit |
| Seal Design | SKF Wave |
| Temperature Range [Max] | 225 °F |
| Construction | CRWH1 |
| Operating Temperature [Max] | 210 °F |
| Shaft Dia. | 2.625 in |
| Speed | 0.07 ft/min |
| Solid | Yes |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Nitrile Rubber (NBR) |
| Housing Bore Dia. | 4.438 in |
| Design | CRWH1 |
| Spring Material | Carbon Steel Garter |
| Lip Style | Internal |
| Pressure | 10 psi |
| Case Construction | Steel Case w/Inner Case |
| Lip Type | Single Lip |
| Overall Width | 0.438 in |
| Operating Temperature [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Surface Speed [Nom] | 3,600 ft/min |
| Case Design | Metal Case, Inner Case |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Inch |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Weight | 0.343 LB |
| EAN or UPC | 85311028028 |
