Find a Service Center
- 2 in Shaft Diameter
- 4 in Housing Bore Diameter
- 20 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Cover/Compensation Ring/Plate Required | No |
| Overall Width | 20 mm |
| Surface Speed [Nom] | 3,390 ft/min |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 4 in, 106 mm |
| Inch/Metric | Metric |
| Construction | CRWH2 |
| Operating Temperature [Max] | 210 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Case Design | Metal Case, Inner Case |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel Garter |
| Case Construction | Steel Case w/Inner Case |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Seal Design | Assembled Design |
| Installation | Housing Press Fit |
| Shaft Dia. | 2 in, 73 mm |
| Pressure | 10 psi |
| Design | CRWH2 |
| Temperature Range [Max] | 225 °F |
| Weight | 0.304 LB |
| EAN or UPC | 85311029346 |
