Find a Service Center
Alternate Products
- 3 in Shaft Diameter
- 4 in Housing Bore Diameter
- 11 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
applications
- Engines
- Drive axles
- Transmissions
- Pumps
- Electric motors
- Speed reducers
- Smaller pumps and general purpose machinery with pressured seal cavities
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 3,600 ft/min |
| Case Design | Metal Case, Inner Case |
| Shaft Dia. | 3.25 in |
| Operating Temperature [Max] | 210 °F |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel Garter |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 225 °F |
| Seal Type | Oil |
| Pressure | 10 psi |
| Overall Width | 0.438 in |
| Installation | Housing Press Fit |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Temperature Range [Min] | -40 °F |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Housing Bore Dia. | 4.249 in |
| Design | CRWH1 |
| Case Construction | Steel Case w/Inner Case |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Cover/Compensation Ring/Plate Required | No |
| Construction | CRWH1 |
| Inch/Metric | Inch |
| Lip Material | Nitrile Rubber (NBR) |
| Lubricant | Oil or Grease |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Style | Internal |
| Weight | 0.338 LB |
| EAN or UPC | 85311031219 |
