Find a Service Center
- 3.5 in Shaft Diameter
- 4.5 in Housing Bore Diameter
- 0.44 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Installation | Housing Press Fit |
| Temperature Range [Min] | -40 °F |
| Operating Temperature [Min] | -5 °F |
| Case Material | Steel |
| Cover/Compensation Ring/Plate Required | No |
| Bore Sealant | Bore Tite |
| Operating Temperature [Max] | 390 °F |
| Lubricant | Oil or Grease |
| Speed | 0.07 ft/min |
| Pressure | 10 psi |
| Temperature Range [Max] | 400 °F |
| Design | CRWH1 |
| Housing Bore Dia. | 4.501 in |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Seal Design | SKF Wave |
| Case Design | Metal Case, Inner Case |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Solid | Yes |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Type | Oil |
| Spring Type | Garter |
| Overall Width | 0.438 in |
| Lip Type | Single Lip |
| Shaft Dia. | 3.5 in |
| Inch/Metric | Inch |
| Construction | CRWH1 |
| Case Construction | Steel Case w/Inner Case |
| Spring Material | Carbon Steel |
| Weight | 0.358 LB |
| EAN or UPC | 85311032261 |
