Find a Service Center
- 3.625 in Shaft Diameter
- 4.626 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Max] | 210 °F |
| Seal Design | SKF Wave |
| Design | CRW1 |
| Case Construction | Steel Case w/o Inner Case |
| Lip Type | Single Lip |
| Seal Application | General Purpose |
| Operating Temperature [Min] | -40 °F |
| Shaft Dia. | 3.625 in |
| Temperature Range [Max] | 225 °F |
| Installation | Housing Press Fit |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Min] | -65 °F |
| Speed | 0.07 ft/min |
| Construction | CRW1 |
| Lubricant | Oil or Grease |
| Housing Bore Dia. | 4.626 in |
| Lip Style | Internal |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Spring Material | Carbon Steel Garter |
| Solid | Yes |
| Case Design | Metal Case |
| Cover/Compensation Ring/Plate Required | No |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Overall Width | 0.375 in |
| Pressure | 10 psi |
| Surface Speed [Nom] | 3,600 ft/min |
| Weight | 0.294 LB |
| EAN or UPC | 85311032933 |
