Find a Service Center
- 3.94 in Shaft Diameter
- 5 in Housing Bore Diameter
- 0.44 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Type | Oil |
| Shaft Dia. | 3.938 in |
| Seal Design | SKF Wave |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Spring Material | Carbon Steel |
| Temperature Range [Max] | 400 °F |
| Inch/Metric | Inch |
| Operating Temperature [Min] | -5 °F |
| Pressure | 10 psi |
| Temperature Range [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Max] | 390 °F |
| Design | CRWH1 |
| Lip Type | Single Lip |
| Case Construction | Steel Case w/Inner Case |
| Installation | Housing Press Fit |
| Housing Bore Dia. | 4.999 in |
| Case Design | Metal Case, Inner Case |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Construction | CRWH1 |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Solid | Yes |
| Case Material | Steel |
| Overall Width | 0.438 in |
| Lip Style | Internal |
| Bore Sealant | Bore Tite |
| Spring Type | Garter |
| Speed | 0.07 ft/min |
| Weight | 0.501 LB |
| EAN or UPC | 85311034128 |
