Find a Service Center
- Radial Shaft Seal
- 42 mm Shaft Diameter
- 70 mm Housing Bore Diameter
- 10 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Case Construction | Rubber Covered Steel Case |
| Seal Design | Standard |
| Seal Application | Light Dirt Exclusion |
| Housing Bore Dia. | 70 mm |
| Seal Type | Grease |
| Temperature Range [Min] | -40 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Construction | HMSA7 |
| Lip Style | Internal |
| Inch/Metric | Metric |
| Shaft Dia. | 42 mm |
| Spring Material | Carbon Steel Garter |
| Lip Type | Dual Lip w/One Spring |
| Overall Width | 10 mm |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Temperature Range [Max] | 250 °F |
| Weight | 0.202 LB |
| EAN or UPC | 85311229463 |
