Find a Service Center
- Radial Shaft Seal
- 42 mm Shaft Diameter
- 70 mm Housing Bore Diameter
- 10 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Case Construction | Rubber Covered Steel Case |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Surface Speed [Nom] | 3,600 ft/min |
| Spring Material | Carbon Steel Garter |
| Housing Bore Dia. | 70 mm |
| Seal Design | Standard |
| Temperature Range [Min] | -40 °F |
| Seal Application | Light Dirt Exclusion |
| Lip Type | Dual Lip w/One Spring |
| Overall Width | 10 mm |
| Seal Type | Grease |
| Lip Style | Internal |
| Temperature Range [Max] | 250 °F |
| Shaft Dia. | 42 mm |
| Inch/Metric | Metric |
| Construction | HMSA7 |
| Weight | 0.202 LB |
| EAN or UPC | 85311229463 |
