Find a Service Center
Alternate Products
- 4.38 in Shaft Diameter
- 5.38 in Housing Bore Diameter
- 0.44 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Pressure | 10 psi |
| Case Construction | Steel Case w/Inner Case |
| Operating Temperature [Min] | -40 °F |
| Lip Type | Single Lip |
| Surface Speed [Nom] | 3,600 ft/min |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Bore Sealant | Bore Tite |
| Housing Bore Dia. | 5.376 in |
| Lip Material | Nitrile Rubber (NBR) |
| Design | CRWH1 |
| Overall Width | 0.438 in |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 210 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Solid | Yes |
| Case Material | Steel |
| Construction | CRWH1 |
| Case Design | Metal Case, Inner Case |
| Spring Type | Garter |
| Temperature Range [Max] | 225 °F |
| Spring Material | Carbon Steel |
| Temperature Range [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Seal Type | Oil |
| Lubricant | Oil or Grease |
| Seal Design | SKF Wave |
| Shaft Dia. | 4.375 in |
| Installation | Housing Press Fit |
| Weight | 1.63 LB |
| EAN or UPC | 85311035491 |
